Infrared Thermography Inspection Miami Dade Electrical Thermal Imaging Testing Services.
All Home Meters - Licensed Professional Engineers providing Infrared Thermography Inspection Services.
Cities are enforcing the Thermographer holds an electrical license as Engineer, Electrical Contractor of Electrical Building Inspector.
The only way that an Infrared Inspection Report for a 40 Year Recertification can be accepted by ALL CITIES is confirming that Thermographer holds an electrical license as a Professional Engineer, Electrical Contractor of Electrical Building Inspector, and ensuring that the report is, at the end, signed and sealed by a Professional Engineer.
Our Infrared Electrical Inspection Report is done and SIGNED & SEALED by a Professional ELECTRICAL Engineer.
Need an Infrared Thermography Electrical Inspection?
Call us at (786) 318-7203 to request an estimate from our Licensed Professional Electrical Engineers, Level II Certified Infrared Thermographers Miami.
We will answer all your questions, concerns and doubts about your Thermal Imaging Testing needs.
How much does a Miami Dade Infrared Thermography Inspection Cost / Electrical Safety Thermal Imaging Camera Scan Testing Services / Certified Thermographer Level II Report / Boca Raton, Boynton Beach.
From $800 for our Thermal Imaging Inspections. Price depends on the area of the building (square feet), number of pieces of equipment, configuration and complexity.
Removal and reinstallation of covers out of the scope of our Electrical Thermal Imaging Inspection. Usually, an electrical contractor charges $100 plus $10 per cover.
Equipment Survey might be required to identify and locate the devices for Thermal Imaging Electrical Inspection and to provide a firm proposal.
786-318-7203 / info@allhomemeters.com
HABLAMOS ESPAÑOL.
You deserve the best, Please do not settle for less.
New 2022 Guidelines.
Thermal Imaging Inspection is a requirement, as part of the Recertification, under Section 8-11 (f) of the County Code, for buildings that have been in existence for the years specified in the Code.
Electrical Thermal Imaging Inspection: New requirement for Recertification.
Miami Thermal Electrical Inspection Testing.
For a system operating at 400 amperes or greater, an inspection with a written report of the following pieces of equipment must be provided as applicable or as otherwise indicated below:
Busways.
Switchgear.
Panelboards (except in dwelling unit load centers).
Disconnects.
Variable Frequency Drives (VFDs).
Starters.
Control Panels.
Timers.
Meter Centers.
Gutters.
Junction Boxes.
Automatic/Manual Transfer Switches.
Exhaust Fans.
Transformers.
This is the minimum data required in an Thermographic Inspection Report.
Certification Level II or III.
Experience as per BORA rules. (holds an electrical license).
List of the Equipment inspected and not inspected and why: e.g. cover cannot be opened, safety issue, needing approval from utility company, etc.).
Summary List of all equipment inspected properly identified: labels, nameplate data, location, measurement date and local time, issues, etc.
Camera information (e.g. manufacturer, specifications: resolution, accuracy, calibration, etc.).
Environmental information affecting Thermography (e.g. ambient temperature, wind speed, background, etc.).
Vision test.
Performance or operating information (e.g. loads, phases, voltage, type of service: one phase, three phases, delta, wye, etc.).
Infrared Thermal scale in each thermal photo to read temperature.
Use of the same palette in the entire report unless a different one should be used to identify an issue.
Infrared Thermal Imaging photos should be accompanied by visual photos of equipment with and without covers.
Measurement determinations.
Possible cause, level of the issue and prioritization (e.g. overload, contact, unbalance, open circuit, repair immediately, next programmed maintenance, etc.).
Any Code violation observed (e.g. improper color for cables, double tap, improper fuse, improper breaker, improper wiring, etc.).
Any anomaly observed (e.g. change of color, visible damage, corrosion, etc.).
Scan of the grounding or bonding conductors in the building main loads/meters center.
Any other information required to meet the standards of Thermographic inspections.
Electrical Inspection Scan measures surface temperatures by using still camera and video.
These Inspection tools see light that is in the heat spectrum.
Testing Survey Inspection.
It is supposed that nearly 25 percent of all electrical failures attributed to faulty electrical connections.
Thermography technology is one of the most effective technologies for preventing failures.
Electrical Inspection Services / Benefits.
Hot spots due to lose connections and bad contacts.
Under-rated cables overheating under existing demand.
Unbalanced loads.
Stressed earth leakage units, circuit breakers, conductors and other electrical elements.
This Inspection can result in significant financial savings for the client by.
Reducing the risk of an electrical fire.
Reducing the risk of an unplanned electrical outage.
Identifying priorities for planned maintenance, resulting in your spend going where it needed most.
Infrared Technology determines if the elements and system have been properly installed and are not damaged.
Infrared Technology reduces downtime.
Reduces risk of equipment failure.
Increases safety.
Improves insurability.
Reduces liability exposure of the designers and installers.
Miami Thermography improves system performance.
Determines elements and systems carry out properly and meet the design intent.
Determines if elements and systems compliance with the project specifications and design.
Reduces construction schedule delays.
Saves money.
Use of Home Scan / Testing / Infrared Electrical Inspection.
Detecting loose or corroded electrical connections.
Detecting electrical unbalance and overloads.
Inspecting bearings and Electrical motors.
Inspecting steam systems Electrical Infrared Thermal Imaging helps better to recognize and report suspect elements.
Enable the repair to done right the first time.
High resistance connections.
Hot spots.
Over loaded cables.
Over loaded fuses or breakers.
Imminent motor or conveyor bearing failure.
Motor windings over heating.
Overheating in distribution equipment.
Phase load imbalance.
Hot spots in high level lighting.
Heat build-up in overcrowded trunking.
Thermal insulation breakdown (hot or cold).
Thermal loss.
Damp ingress.
Call us at (786) 318-7203 to schedule an inspection by one of our Licensed Professional Electrical Engineers, Level II Certified Infrared Thermographers Miami.